Custom Dual Roller Blinds
Upgrade your space with Custom Dual Roller Blinds, offering the perfect balance of light control and privacy. Featuring a combination of blockout and sheer fabrics, these blinds let you adjust natural light while maintaining privacy. Designed for versatility, they suit any home décor and are easy to install. Choose from a range of colours and finishes to match your style. Enjoy a modern, sleek look with the convenience of two blinds in one. Ideal for bedrooms, living areas, and offices, Custom Dual Roller Blinds enhance comfort and energy efficiency.
Why buy direct from Shutters4u
- Made in our own Adelaide factory – family-run and factory-direct since 2010.
- 5-year warranty on products and control systems.
- Cut to your measurements and delivered Australia-wide in 2–3 weeks.
- Free colour samples posted out before you order.
- PayPal or Zip – buy now, pay later available.
Product Details
We Say
Custom Dual Roller Blinds combine two fabrics – one blockout, one light-filtering – on a single roller system, so one blind gives you both full privacy and filtered daylight. Pick your blockout colour and your light-filtering colour and switch between them depending on the time of day, without swapping blinds.
Only need one fabric? See our Custom Roller Blinds instead – our single-fabric, made-to-measure roller blind.
Like all our roller blinds, Custom Dual Roller Blinds are made to your exact measurements and manufactured in-house from start to finish, with clear installation instructions supplied so you can fit them yourself.
Product Highlights
- Made to measure: widths up to 3010mm, heights up to 3300mm
- Two fabrics per blind: choose 1 of 12 blockout colours and 1 of 12 light-filtering colours
- Roll configuration is fixed: the front fabric always rolls front and the back fabric always rolls back, so the two blinds don't clash when operating
- Chain control side: Left or Right
- Fit type: On Wall or In Reveal
- Bottom bar colour: White, Light Grey or Black
- Control: manual chain as standard, or upgrade to 2x electric or 2x battery remote motors (+$400, to drive both blinds)
Recess or Face Fit? (In Reveal vs On Wall)
The order form asks you to choose a Fit Type. Get this decision right first, because it changes the measurements you send us – and because a dual blind needs more room than a single one.
In Reveal – also called a recess fit. The blind sits inside the window opening for a neat, built-in look. Measure the inside width of the opening and send us that exact figure; we make the deductions at the factory. The thing to watch on a dual blind is depth: because a dual system carries two rolls of fabric on one set of brackets, it needs noticeably more depth than a single roller blind – plan on roughly half as much again. A single blind sits comfortably in about 60mm of reveal, so a shallow reveal that would happily take a single blind may still be too tight for a dual. Check your depth against our Roller Blinds Measuring Guide before you order, and if it's marginal, choose On Wall.
On Wall – also called a face fit. The blind mounts on the wall, or on the face of the frame, in front of the window. This is the usual choice for dual blinds, because it removes the depth problem entirely. It also suits reveals that are uneven or blocked by window handles and locks, and it gives the best light block, since the fabric overlaps the opening on every side. Add roughly 70mm to both the width and the drop so the blind covers the gap. A matching pelmet tidies up the front of the blind where it stands off the frame.
Not sure which to pick? On Wall is the forgiving choice and works on any window. In Reveal is the tidier one, but only if your reveal is deep enough for a dual system.
One note on bracket names. Our installation guide mentions "face-fix" and "top-fix". That is a different thing from the Fit Type above – it describes which way the bracket screws on, with face-fix going into a vertical surface and top-fix going upwards into an overhead one. The brackets we supply do both, so either Fit Type can be installed either way, depending on the surface you are fixing into.
Easy Fitting Guide
Tools you'll need: drill, screws, screwdriver, spirit level, pencil, tape measure.
- Decide your Fit Type (On Wall or In Reveal) and take your measurements – see the section above, and our Roller Blinds Measuring Guide, before you order.
- Fix the brackets to the window frame, marking their position with a pencil and checking they're level.
- Drill and fasten the brackets securely (an impact driver makes this quicker).
- Fit the ball chain system and end plugs into the roller tubes – the front and back rolls are pre-set at the factory, so there's nothing to configure here.
- Lift the blinds into the brackets and snap them into place.
- Anchor the chains to the frame with the supplied cord brackets for child safety.
Not confident doing it yourself? We can put you in touch with experienced installers in Adelaide – call us on 0475 217 438.
Which Room Is This For?
Warranty
5-year warranty on products and control systems.
Delivery
Quick turn-around frames 2-3 weeks delivery times.








Reviews